email deliverability checklist

Email Deliverability Checklist for B2B Outbound: What to Check, When, and What Passes

In this post:

This email deliverability checklist covers every check that decides whether your cold email lands in the inbox. Each check tells you what passes, how often to look and where to find it.

TL;DR

  • Keep cold email on separate sending domains with names that describe your service, because Google counts mail from your subdomains toward your main domain's bulk sender status, and that status is permanent.

  • Set up SPF with one record and no more than 10 lookups, DKIM with 2048-bit keys, and DMARC starting at p=none with reports switched on.

  • The published rules from Gmail, Yahoo and Outlook.com mostly cover personal inboxes, so your B2B buyers' corporate filters in Microsoft 365 and Google Workspace expect more from you.

  • Keep bounce rates under 2% and spam complaints under 0.1%, and stop sending to any address that returns a permanent error.

  • Check blocklists and inbox placement every week, and when a number slips, trace it back through every layer before you change anything.

How to use our email delieverability checklist

Each section covers one layer of your sending system, and each table tells you what passes, how often to check it and where. Work through the setup items once, then put the weekly and monthly ones in someone's calendar.

What to check and how often, from one-time setup items to weekly, monthly and quarterly checks

In our experience, deliverability issues rarely come from one big mistake, and they usually come from small checks nobody owns. We also label every number as either a mailbox provider rule or guidance from a sending tool, so you know which is which.

The email deliverability checklist for B2B outbound in 2026

The checklist below has nine parts, and each part covers one layer of your sending setup. Work through them in order, because each layer depends on the one before it.

Layer 1: Set up your sending domains and mailboxes

Everything else depends on where you send emails from. The most important rule is to keep cold email off your main domain.

Google counts mail from a primary domain and its subdomains together toward its bulk sender threshold of around 5,000 messages a day, and once a domain is classed as a bulk sender, it stays one. So a subdomain like outreach.yourcompany.com doesn't protect the domain your invoices and customer emails come from.

Google sender guidelines FAQ explaining that subdomain mail counts toward the main domain’s bulk sender limit

Source: Google, Email sender guidelines FAQ

We make one exception to that rule. Some enterprise clients in compliance-heavy industries won't send from unbranded domains, so for one client targeting companies with more than 2,000 employees, we used subdomains of the main domain instead.

Subdomains are debated, and they only make sense when the main domain has years of good reputation behind it, because a strong reputation is much harder to damage. Before you choose them, look up your main domain in Spamhaus's domain reputation checker, and stick to separate domains if the score is low.

New domains also start at a disadvantage, because Spamhaus gives newly registered domains a "poor" reputation by default, so we use a mix of new domains and older aged domains. If you target large enterprises, plan for domains that have aged at least a year before they carry cold email.

Watch the names of your sending domains as well.

We avoid sending domains that copy the company name one to one, because security gateways look for patterns, and in our experience, when one domain in a set of near-identical brand domains gets blocked, the others tend to follow. Names that describe the service spread that risk.

Near-copies of a brand name share one pattern, while service-describing domain names spread the blocking risk

We also split sending across email providers, with about half through Google, 40% through Outlook and 10% through a custom SMTP setup, so one filtering change can't stop every campaign. If most of your market uses Microsoft Outlook, send from Outlook or SMTP mailboxes too, instead of only Google Workspace.

Most B2B teams don't need a dedicated IP address. Cold outbound from Google Workspace or Microsoft 365 shares the provider's IP addresses, so your domain reputation and sender reputation do most of the work.

Sending domain checklist

Check

What passes

Cadence

Where to check

Separate sending domains

No cold email from your main domain or its subdomains, unless a strong main domain and a compliance need justify subdomains

Once at setup

Your sending tool and Spamhaus

Domain names

Names that describe your service on a classic extension like .com, instead of near-copies of your brand

Once at setup

Your registrar

Domain age

At least a year old when you target large enterprises

Once at setup

Your registrar

Mailboxes per domain

Three to five at most, per Instantly

Quarterly

Your sending tool

Spread across email providers

A mix of Google and Microsoft mailboxes

Quarterly

Your sending tool

Under platform limits

Under 2,000 messages a day per Google Workspace user and 10,000 recipients a day per Exchange Online mailbox

Monthly

Google and Microsoft admin consoles

Layer 2: Authenticate your domains with SPF, DKIM and DMARC

Authentication proves your sender identity to receiving servers and protects your sender reputation. Without it, Gmail, Yahoo and Outlook.com can reject your mail outright.

How SPF, DKIM and DMARC work together

SPF (Sender Policy Framework) lists the servers allowed to send email for your domain. Each domain needs exactly one SPF record with no more than 10 DNS lookups, because a second record or an 11th lookup breaks it.

DKIM (DomainKeys Identified Mail) adds a digital signature, so the receiving server can confirm nobody changed the message on the way. Google and Yahoo require at least 1024-bit keys and recommend 2048.

DMARC (Domain-based Message Authentication, Reporting and Conformance) checks that your From domain lines up with SPF or DKIM and tells servers what to do when a message fails. Start with v=DMARC1; p=none; rua=mailto:dmarc@yourdomain.com and move toward p=reject as your reports come back clean.

How SPF, DKIM and DMARC work together, and the DMARC policy steps from none to reject

The DMARC standard changed in May 2026 to RFC 9989, which drops the old pct tag, so don't be surprised when older guides still show it.

RFC 9989 section explaining that the new DMARC standard removes the old pct tag

Source: RFC 9989, Domain-based Message Authentication, Reporting and Conformance

Your sending domains also need MX records so they can receive replies, plus a valid reverse DNS (PTR) record and encrypted TLS connections, which Google requires from every sender.

Authentication checklist

Check

What passes

Cadence

Where to check

SPF record

Exactly one, with 10 lookups or fewer and ending in ~all

Once at setup, after every new tool

MXToolbox

DKIM

2048-bit keys, rotated at least twice a year per M3AAWG

Twice a year

Your email provider's admin console

DMARC

At least p=none, aligned, with reports switched on

Once at setup

Google Check MX or MXToolbox

DMARC enforcement

Moving from none to quarantine to reject

Quarterly

Your DMARC reports

MX, reverse DNS and TLS

All three in place

Once at setup

Your email provider's settings

Layer 3: Compare and meet the sending rules from Gmail, Yahoo and Microsoft

The big mailbox providers have all tightened their rules since 2024. Google and Yahoo started enforcing in February 2024, Apple followed for iCloud in February 2025, and Microsoft for Outlook.com in May 2025.

Provider

Who the rules cover

What they require

If you miss them

Gmail

Around 5,000 messages a day to personal Gmail accounts

SPF, DKIM and aligned DMARC, one-click unsubscribe on marketing mail honored within 48 hours, spam rate under 0.3% with 0.1% as the target

Temporary and permanent rejections since November 2025

Yahoo

Bulk senders

SPF, DKIM, DMARC at p=none or stricter, one-click unsubscribe honored within two days, complaints under 0.3%

Filtering and blocking

Outlook.com

More than 5,000 emails a day to consumer Outlook addresses

Passing SPF and DKIM, DMARC at least p=none and aligned

Junk first, then rejection with "550 5.7.515"

Apple iCloud

Bulk senders

SPF, DKIM, a DMARC record, reverse DNS and a bounce policy

Rejection

Why the published rules are only the minimum for B2B outbound

Here's the part almost no deliverability checklist mentions. Google says its sender guidelines don't apply to messages sent to Google Workspace accounts, and Microsoft's rules cover consumer Outlook addresses and leave out Microsoft 365.

Google confirms its email sender guidelines don’t apply to messages sent to Google Workspace accounts

Source: Google, Email sender guidelines FAQ

Your B2B buyers mostly use Workspace and Microsoft 365, often behind corporate filters that publish no rules. Those filters judge you on your sender reputation, your authentication and how recipients react, so the published rules are the floor.

The bigger the company, the harder this gets. Companies from around 200 employees up usually use email security gateways like Proofpoint, Barracuda or Mimecast, which are much harder to get through and quick to block a sender, so the larger your targets, the more every other part of this checklist matters.

Email filtering gets stricter from personal inboxes to Microsoft 365 and Workspace to corporate security gateways

Layer 4: Check and pass the Microsoft 365 checks most deliverability guides miss

Microsoft 365 is where a lot of outbound teams lose mail without noticing. A campaign looks fine in Gmail tests, and the same message goes to Junk or quarantine at a corporate tenant.

You can't see into a prospect's tenant, but you can check your inbox placement at Microsoft by sending test emails to a Microsoft 365 mailbox you control. Paste the headers into Microsoft's Message Header Analyzer and look at three values.

  • SFV shows Microsoft's spam verdict, where SFV:NSPM means Microsoft didn't mark the message as spam, and SFV:SPM means it did.

  • BCL is the bulk complaint level from 0 to 9, and a higher number means Microsoft expects more people to complain about mail like yours.

  • compauth is Microsoft's combined SPF, DKIM and DMARC result for your From domain, and a fail means Microsoft doesn't trust your sender identity.

Microsoft documentation defining SFV:NSPM as a message that spam filtering marked as not spam

Source: Microsoft, anti-spam message headers

Test against the Strict preset

Microsoft 365 admins can switch on preset security policies called Standard and Strict, and Microsoft always applies Strict first. Mail with a BCL of 7 or higher goes to Junk under the default policy, Standard lowers that to 6, and Strict quarantines anything at 5 or above.

Microsoft recommended settings showing bulk email thresholds of 7 by default, 6 for Standard and 5 for Strict

Source: Microsoft, recommended settings for EOP and Defender for Office 365

So the same email can reach the inbox at one company and end up in quarantine at another. We test against a Strict mailbox before scaling a campaign, because that's the hardest filter your buyers can have.

Layer 5: Warm up your mailboxes and control sending volume

New domains and mailboxes have no reputation, and when you send emails in bulk from them straight away, it looks exactly like spam. Warm up builds that sender reputation by starting with very low volume and increasing it slowly.

During the warm up phase, a warm-up tool exchanges emails with a network of mailboxes that open, reply and mark them as important. We keep warm up on after campaigns start and avoid sudden spikes, because volume that jumps from zero to full speed looks like a hacked account.

A steady email warm-up ramp compared with a sudden sending spike that looks like a hacked account

Ask which warm-up pool your tool uses as well, because warm up only helps when the mailboxes in the pool behave like real ones.

Warm up checklist

Check

What passes

Cadence

Where to check

Warm up before the first campaign

At least two weeks per Instantly, or three to four weeks per lemlist

Once per new mailbox

Your warm-up tool

Daily sends per mailbox

Around 30 per Instantly, under 40 for young mailboxes per lemlist, and no more than 50 per Smartlead

Weekly

Your sending tool

Daily sends per domain

Under about 500 cold emails, per Smartlead

Weekly

Your sending tool

Volume drops when problems appear

Lower volume as soon as bounce rates or deferrals rise, which Google also recommends

Whenever a number slips

Your sending tool

Those per-mailbox numbers are guidance from sending tools, and neither Google nor Microsoft sets them. Hunter's 2026 report on 31 million outreach emails points the same way, with senders at 20 to 49 emails a day getting a 5.7% reply rate against a 4.5% average.

Layer 6: Clean your list to keep bounce rates and unsubscribes low

Every invalid address, spam trap and ignored unsubscribe costs you sender reputation. This is where cold email deliverability connects most directly to your GTM system, because your lists come from your enrichment workflows and your CRM.

Email marketing teams protect list quality with double opt-in, and cold outbound can't use it, so verification does that job instead. We verify every address through a waterfall of providers before it reaches a sequence, and Hunter's 2026 report put most of its 3.6% average bounce rate down to unverified contact data.

A hard bounce is a permanent (5xx) error, and Microsoft forbids resending after one, so hard bounces should leave your lists immediately. Spam traps are harder to spot because they look like normal addresses, including old ones that once belonged to real people.

List hygiene checklist

Check

What passes

Cadence

Where to check

Verification before every sequence

Invalid addresses removed, catch-all addresses handled separately

Before every campaign

Your verification tool

Hard bounce rate

Under 2%

Weekly

Your sending tool

Hard bounces suppressed

No resending after a permanent error

Monthly

Your suppression list

Unsubscribes honored

Within 48 hours for Gmail and two days for Yahoo

Monthly

Your sending tool and CRM

Bounces, unsubscribes and spam complaints synced

In HubSpot or Salesforce, so no other tool emails them again

Monthly

Your CRM

Old lists and inactive subscribers re-checked

Verified again before reuse

Every 90 days

Your verification tool

That 2% bounce limit is industry guidance, because no mailbox provider publishes one. The clearest published policy comes from Amazon SES, which reviews accounts at 5% and may pause them at 10%.

Amazon SES FAQ stating accounts go under review at a 5% bounce rate and may pause at 10%

Source: Amazon SES, enforcement FAQs

Layer 7: Review your content quality and tracking

Once the technical layers pass, content quality decides whether your emails get read or turn into spam complaints.

According to Gartner's 2025 survey of 632 buyers, 73% of B2B buyers actively avoid suppliers who send irrelevant outreach, so we segment lists on behavioral data like website visits, hiring or a new person in the role.

Subject lines, spam trigger words and tracking

Spam filters care more about your reputation than single words, but spam trigger words still add up. We keep subject lines short and plain, avoid all-caps words and exclamation points, and send plain text, which keeps the text-to-image ratio safe.

Open tracking adds a tiny image that email clients load when the message opens, and that pixel is one of the signals spam filters look at. In Hunter's 2026 report, campaigns with open tracking off got a 7.4% reply rate, against 4.4% with it on.

Content checklist

Check

What passes

Cadence

Where to check

Open tracking

Off for cold email

Before every campaign

Your campaign settings

Links

None in the first email and at most one in a follow up, per lemlist

Before every campaign

The email itself

Format

Plain text, with no attachments

Before every campaign

The email itself

Subject lines

Honest, with no fake "Re:" or "Fwd:", which Google warns against

Before every campaign

The email itself

Sender details

Your real identity and a clear unsubscribe link or opt-out line

Before every campaign

The email itself

Layer 8: Follow the consent rules for B2B cold email in the Netherlands and the EU

In Europe, the rules for cold email to businesses are stricter than many teams assume. This section summarizes the official positions and can't replace legal advice, so check your situation with a lawyer.

In the Netherlands, article 11.7 of the Telecommunications Act (Telecommunicatiewet) bans unsolicited commercial email without prior consent, and the Dutch privacy regulator says this also applies to emails to other businesses. The law allows two exceptions for business recipients.

  • The company published the address specifically to receive messages like yours.

  • The recipient is a company outside the European Economic Area, and you follow its local rules.

Every message has to show who you really are and give a working way to opt out, and the regulator ACM puts the burden of proof on the sender.

Dutch rules for B2B cold email: prior consent by default, two exceptions, and identity plus opt-out always

GDPR's "legitimate interest" doesn't change this, because the sending rule comes from separate law based on the EU's ePrivacy Directive, which each EU country applies in its own way.

Layer 9: Monitor your domain reputation and sender reputation

Monitoring tells you when your sender reputation starts slipping. Without it, a flagged domain or a broken DNS record can go unnoticed for weeks while your team rewrites copy that was never the problem.

Google Postmaster Tools shows your spam rate and domain reputation for personal Gmail accounts, and we check it weekly, though low-volume senders often see an empty dashboard.

Microsoft SNDS only helps if you own your sending IP addresses, so most teams rely on seed tests and blacklist monitoring through Spamhaus or MXToolbox.

Monitoring checklist

Check

What passes

Cadence

Where to check

Spam complaints

Under 0.1%, and never 0.3% or higher

Weekly

Google Postmaster Tools and your sending tool

Inbox placement

Most test emails land in the inbox at Gmail and Microsoft 365

Weekly

A seed testing tool

Blocklists

No domain or IP listed

Weekly

Spamhaus and MXToolbox

Microsoft 365 headers

SFV:NSPM, a low BCL and compauth=pass

Before every campaign

Message Header Analyzer

Engagement metrics

Reply, bounce and unsubscribe rates in line with past campaigns

Weekly

Your sending tool

DMARC reports

No unknown services sending as your domain

Monthly

Your DMARC reports

Troubleshooting deliverability issues

When a number slips, trace it back through the layers before you change anything, because a random fix usually hides the real cause. An underperforming campaign almost always has one of three problems, infrastructure, targeting or messaging, and the reply pattern tells you which one to check first.

What you see

Check first

What to look at

Very few replies of any kind

Infrastructure, targeting or messaging

Start with deliverability, because emails in spam get no replies at all

Plenty of replies, few of them positive

Messaging or targeting

The angle, the proof and whether the segment really has the pain

Few replies, but most of them positive

Infrastructure or targeting

Inbox placement, and whether the list is too narrow

Hard bounces jump

List quality

The list source and when it was verified

Replies drop at one provider

That provider's filtering

Inbox placement tests and message headers

Replies drop everywhere

Domain or IP reputation

Blocklists, DNS records and recent changes

Spam complaints rise

Targeting and content

The segment, the copy and the unsubscribe link

New domains never reach the inbox

Warm up

Warm up length, volume and authentication

How email deliverability fits your GTM system

We treat email deliverability as part of the whole GTM system, because your outbound, your demo follow up and your meeting bookings all depend on reaching the inbox. A deliverability failure shows up as a pipeline problem first.

So the last checks are about how the system fits together. Your domains, DNS, DMARC reports and sending accounts should belong to your company's own accounts with a named owner, bounces and replies should sync to your CRM, and LinkedIn and calls should carry outreach while you fix a domain.

Email deliverability as part of the GTM system, with owned accounts, CRM sync and backup channels

That's how we build deliverability for clients at Nebor, a GTM and RevOps agency, as one part of the outbound and inbound system in their own accounts. Our email deliverability guide explains the reasoning behind each layer, and our email deliverability statistics cover the data.

If your reply rates have dropped and nobody can tell you why, book a call with us and we'll go through the checklist with you.

Frequently asked questions about email deliverability

Is it a deliverability problem or a messaging problem?

Start with the reply pattern before anything else. Plenty of replies with few positive ones points to messaging or targeting, while few replies that are mostly positive points to infrastructure or targeting, so send a seed test across Gmail and Microsoft 365 to check inbox placement before you rewrite anything.

What is a good bounce rate for cold email?

Aim for a hard bounce rate under 2%. No mailbox provider publishes a bounce threshold, but Amazon SES uses 2% as its guideline, and Hunter's 2026 report found an average of 3.6% across cold outreach.

Should you send cold email from your main domain?

We'd advise against it, because Google counts mail from your main domain and its subdomains together toward its bulk sender threshold, and bulk sender status is permanent. Use separate domains with names that describe your service, and only consider subdomains if your main domain has a strong, long reputation and a compliance reason to stay branded.

Is B2B cold email legal in the Netherlands?

The Dutch rules are stricter than most teams expect. The privacy regulator's position is that commercial email to businesses needs prior consent, unless the company published the address for that purpose or is based outside the EEA, so check your approach with a lawyer.

Revenue tips, Weekly

Workflows, automation strategies, and GTM insights delivered straight

Ready to build your
GTM engine

Let's talk about your sales challenges and how we can help you scale

Nebor brand chevron in purple, section accent
Nebor brand chevron in orange and purple, section accent
Revenue tips, Weekly

Workflows, automation strategies, and GTM insights delivered straight

Ready to build your
GTM engine

Let's talk about your sales challenges and how we can help you scale

Nebor brand chevron in purple, section accent
Nebor brand chevron in orange and purple, section accent

Stay ahead with Nebor

Stay ahead with Nebor

Get insights on workflows, GTM strategy, and automation delivered to your inbox.

Get insights on workflows, GTM strategy, and automation delivered to your inbox.

By clicking Sign Up you're confirming that you agree with our Terms and Conditions.

Services

Case Studies

Resources

About

Services

Case Studies

Resources

About

Nebor logo, a go-to-market and RevOps agency based in Amsterdam

Services

Case Studies

Resources

About

Nebor logo, a go-to-market and RevOps agency based in Amsterdam